Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Edge Performance

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #55318
    Jacky
    Guest

    how can we perform edge throughput enhancement?

    #55319
    Pix
    Guest

    There are different types of limitations, but mostly 2 families:
    – interfaces limitation
    – interference limitation

    — interface:
    check that your Abis, Ater PS and Gb interface are not too loaded. If above 70%, you can expect some shrinking of the throughput.

    — interference:
    check that your average C/I in the area you want to enhance is above 20dB or even more if possible.

    #55320
    Jacky
    Guest

    Thanks pix, one more think, how could i monitor and enhance the C/I?

    #55321
    pix
    Guest

    C/I reflects the amount of interference : high C/I –> no interference
    low C/I (less that 9dB) –> high interference

    the amount of interernece depends on the quality of your frequency planning, that’s all… 😉

    #55322
    Jacky
    Guest

    Thanks 🙂

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.