Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HSR/hi HO rev rate

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #55161
    Ali
    Guest

    hello all,

    i have high handover reversion rate with one of the neighbor of indoor micro[IBS],causing bad HSR,can anyone suggest which paramter to change,current settings are:
    layerthr: 80
    layerhyst: 5
    psstemp:0
    ptitemp:0

    secondly, can any one explain how layerhyst work,pls explain as i am new in optimization

    waiting for urgent reply.

    Ali

    #55162
    Toufic
    Guest

    What is your provider??
    what equipment?

    #55163
    Ali
    Guest

    Ericsson RBS2308,it is the IBS but the point to note is that all three neighbors is the MACRO BTS which is on the same building rooftop.

    #55164
    Ali
    Guest

    Hello Pix,

    can u explain how to reduce handover reversion rate of one of the neighbors of an indoor micro site…do write back.

    #55165
    Pix
    Guest

    The reversion occurs when HO goes from outdoor to indoor, or indoor to outdoor ?

    If you’re working with ericsson, i’m not sure i can give very interesting solutions 🙂 I don’t know ericsson…

    #55166
    Ater
    Guest

    Please especify in wich layers are the macro and the micro ( micro shoud be in a lower layer to be consider prioritary to HO)

    Did you check the BTSs ( outdoor + TRX conf) maybe this is not a parameters issue?

    Are the macro and micro in the same band?

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.