Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HoML

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #55042
    Antapé
    Guest

    Hi!

    I find HOMARGINLEV for a cell at value 0, what is the effect? changing the value of this parameter either increasing or decreasing leads to which consequence?

    #55043
    pix
    Guest

    this parameter has an impact in the candidate cell evaluation of the handover preparation of handovers cause 3, 5, 28 (HO LEV UL, HO LEV DL and FAST TRAFFIC HO)

    The candidate “n” for this HO must verify the algo:
    PBGT(n) > HO MARGIN LEV

    0dB is a good setting.
    If HO MARGIN LEV greater than 0dB, there is a risk a cell n is removed from the list of candidate without a valid reason

    if HO MARGIN LEV less than 0dB, the cell n will remain in the list even though it is much worse than the serving cell. (PBGT (n) less than PBGT (s))

    Regards
    pix

    #55044
    Antapé
    Guest

    Hi pix,

    thank you for your help, xhat do you think of the value of 2 db for homarginlev?

    #55045
    Pix
    Guest

    antapӎ,

    this is the default alcatel value
    therefore, it is good.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.