Handover Timers This topic has 2 replies, 1 voice, and was last updated 15 years, 3 months ago by Pix. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts 10th December 2008 at 15:59 #54995 BHHGuest in RNO, are they any Kpi’s related to HO fail due to timer expiry? and how we could perform optimization based on HO Timer Tuning? 12th December 2008 at 09:31 #54996 BHHGuest in the same topic what are the RNO indicators that could provide the incoming Inter BSC HO? after a HO audit @ MSC and BSC Level we found that the Values are not correlated!! normally they should be the same. 13th December 2008 at 09:51 #54997 PixGuest Timer expiry is usually understood as a “radio” problem in RNO. So check all failures due to “Radio” in the Inc oand Outg Handovers indicators family. Inter BSC HO are called “External” handovers in RNO. Easy to spot the right indicators : there are specific families for external HO (inc and outg) Author Posts Viewing 3 posts - 1 through 3 (of 3 total) The forum ‘Telecom Design’ is closed to new topics and replies.