Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GSM basics

Viewing 15 posts - 31 through 45 (of 157 total)
  • Author
    Posts
  • #34445
    Zone
    Guest

    Waleed, is there a some chance that you can pass some papers to me for bts components?

    #34446
    Zone
    Guest

    what about HW components of BSC, BTS..COBA, COSA, DUAMCO, CU….?

    #34447
    Raj
    Guest

    Can some one tell me what are the building blocks i.e hw and sw of a typical GSM BTS and where to get the detail information.

    #34448
    Raj
    Guest

    Can some one tell me what are the building blocks i.e hw and sw of a typical GSM BTS and where to get the detail information.

    #34449
    raj
    Guest

    What is the best side to understand the GSm traffic planning , What is the Eralg undersatnding

    #34450
    raj
    Guest

    What is the best site or some one can send me the deatils nfo on traffic planning on inbuilding GSm solutions, or general erlang planning of GSM network

    #34451
    Ahmer
    Guest

    Hi friends…

    Well I am quite new here, just came across this place by chance…

    would really appreciate if someone could guide me to appropriate material for traffic dimensioning in gsm network

    #34452
    Mohammed Nayeemuddin
    Guest

    hi
    Monika

    can you eplain me in brief, how to design the TCH.

    #34453
    Benson
    Guest

    Dear Vijay Sharma,

    Pliz help me to undersatnd what a 8,4,4 BTS configuration means. May you please send me some information on BSS commissioning procedures. My e-mail is bncube@teleaccess.co.zw. Thanking you in advance.

    Regards

    Benson

    #34454
    Dinesh Patil
    Guest

    Hi
    I Am Telecomm Engg,I want to improve my knowledge of telecomm technology for that i need a mannual.

    #34455
    Mohammed Nayeemuddin
    Guest

    Hi

    serena

    pls can u tell me how many voice calls can be made in one traffic channel

    #34456
    elfab
    Guest

    hello everu body
    I ‘m new in this forum…there si any body who works with the ellipse planning microwave,
    I wana docs about cell and FH planning using this tool
    have nice day & thank u

    #34457
    Karthik
    Guest

    A big doubt. Can anyone clarify??

    We say that each Frequency Channel is separated by 200KHz. So this is the effective Bandwidth.This channel is divided into 8 Timeslots.
    So 1/200KHz = 5 Microsec.

    But if you see that 8 Timeslots constitutes one Frequency Channel, then as far as calculations show:
    1 Timeslot = 0.577ms.
    Which means 8 Timeslots = 4.16ms.

    Can you justify how 5 Microsec can be divided so that we get 4.16ms.

    I give up, how come 5 Microsec = 4.16ms ??????????????

    #34458
    Mohammed Nayeemuddin
    Guest

    Mr muzzamil
    Assalam ali kum
    can u pls explain me, how many voice call can be handled by one traffic channel at a time

    #34459
    Pramod
    Guest

    To Kartik ,
    Buddy the other time left is the burst wherin we call it the Guard period in the burst (Dummy Burst- No data)

Viewing 15 posts - 31 through 45 (of 157 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.