Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GPRS Gs interface & paging

Viewing 14 posts - 46 through 59 (of 59 total)
  • Author
    Posts
  • #54893
    kamal
    Guest

    Hi Pix,

    Yap it was just d confusion..!!

    N I already read 29.018 Jan-2012 Release..!!

    Also analysed trace on Gs & Gb..

    I like that only one sentence from spec..
    “The SGSN shall not retransmit the PAGING CS message”

    That’s all..There is a T5 timer in MSC,after expiry of same MSC should stop asking SGSN about..!! ๐Ÿ™‚

    Some how I have convinced CS core guys with those arguments..!!

    Cheers,
    Kamal Kotecha

    #54894
    pix
    Guest

    ok… but i feel like your problem is not yet clearly defined. Maybe it is clear in your mind ๐Ÿ˜‰

    #54895
    kamal
    Guest

    Well,

    Problem was like ..

    When someone try to call the MS which is not reachable(in real),MSC was playing announcement that Number does not exist..

    MSC guys likely to be shout on us as Gs was enable for paging & only SGSN attach subscribers were facing d issue..!!

    But It was concluded that SGSN won’t monitor this paging request as it will not repeat any PAGING-CS msg sent to bsc..

    So,MSC is having timer T5,after expiry of the same,MSC should stop asking to SGSN n declare MS as unrechable..

    Ultimately,Issue seems to be between timer conflict bet’n announcement & T5 expiry..

    Means SGSN is not Guilty..!! LOl..

    Cheers,
    Kamal Kotecha

    #54896
    pix
    Guest

    kamal,

    thanks for the clarification.
    i misread your old post : the problem was in the message played by MSC, but i didn’t get this !!
    very interesting case, doctor, thanks for sharing it here ๐Ÿ˜‰

    cheers
    pix

    #54897
    sanja
    Guest

    Does anybody know how can I calculate the percentage of users that cannot be CS paged when they have active PS session?
    (if we consider that we don’t have Gs interface)

    Thanks!

    #54898
    pix
    Guest

    well, not directly.
    but if your paging rate (from nss counters) is low, it might be due to users not being able to be paged while in PTM.

    also, from BSS counters, you can count how many “GPRS suspend” occur. It means that either the MS in PTM has setup a call or received a call (through paging).

    I don’t see other ways to count it…

    Regards
    pix

    #54899
    san
    Guest

    Does anybody have information on how to calculate the percentage of the users that are CS paged while in they have active PDP context?

    Thanks in advance.

    #54900
    sanja
    Guest

    Thanks for the prompt suggestion Pix.
    I’ll have that in mind, I’ll check for that counter in E/// BSC statistics.

    #54901
    jay
    Guest

    counters require for GPRS Gb Available and Ater CS GPRS Available.

    #54902
    Kamal K
    Guest

    Hi Pix,

    Again Issue with Gs interface..

    Android Os phone,when switched on,comes directly in PTM mode,

    Now when there is not transaction within certain period(Say till detach time),SGSN detach the Ms..Mean While,MSC will also detach the MS with flag ISGSN(Implicit detach by SGSN)

    Now if someone try to call that MS then it will be sound as un-rechable..!!

    While in nokia Handset,there is a mode called Always Online & Whenever Needed…So not having this issue..

    Only Android Phone are having the issue…

    #54903
    Eshdev
    Guest

    Hi,
    My query is what role does Gs interface play in call flow?
    Recently in our MSC all MS were unreachable due to Gs interface issue.Can you explain elaborately how?
    Thanks in advance

    #54904
    shree
    Guest

    What is The role of Gs interface in roamong case or call flow
    pls explin

    #54905
    Gyana
    Guest

    call setup time increased while we have rehomed some bsc from one SGSN to another new SGSN for high end mobile.

    for example when called party has PDP attached .call setup time 14

    for example when called party has PDP detached .call setup time 5

    #54906
    mns
    Guest

    When Gs Interface is not present…

    When Ms tries to browse to packet network after Attach Complete…. there is not pdp activation. After multiple attempts of Attach, MS is able browse internet ….

    Can Any one explain, how to re-solve this issue.

Viewing 14 posts - 46 through 59 (of 59 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.