Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Erlang

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #54630
    nish
    Guest

    Dear all

    According to the TCH traffic rate (in Erlangs) how can we decide the requirement of the number of TRX for a cell……..

    #54631
    RH
    Guest

    1st->U have to know the no. of total subscriber(let’s say 1000) and average erlang per subscriber(let,s say it 25 mErlang) in that area.
    Multiplying these 2 values, u can get the total erlangs in that area.(1000*.025=25 Erlangs)
    2nd->From the erlang B table, u need to find out how many channel u need to carry all that traffic.(Depending how much blocking u are allowed to give).Lets say ur allowed blocking is 2%,then required no of channel= 34)
    3rd->From that no. of Channels u can plan the no. of TRX for that particular cell serving that area.
    (In my example for 34 channel, 5 TRX can carry that traffic).
    Hope,this will somewhat clear u.

    #54632
    Dear RH
    Guest

    thanks a lot for ur consideration n provide valid info …..

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.