[nish]

Hi

I’m working for ZTE vendors, there in the measurement report they are having the column called

Uplink RQ0 to Uplink RQ7 and
Downlink RQ0 to Downlink RQ7

According to there expalnation , these are related with the interference… So I’m asking that If any one of you have some idea regarding this plz let me know the information…Plzzzzzzzzzzz

[RH]

Hi Nish,
May be they indicates Uplink RxQual value and Downlink RxQual values.
And you might know that RxQual values are related to BER.Lower value of RxQual means good quality and higher value means poor quality.
RxQual should be poor where there is interferences.Good level and poor RxQual indicates that there is interferences.
Besides,Poor level also cause poor RxQual.
(So u can ovserved combined measurment graph for RxQual and RxLevel, and if u find poor qual due to poor level then its ok,but if u find level is good and qual is poor then might be interferences.)

[Author]

Posts