Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Drop Call due to O&M intervention

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #54599
    Alexander D
    Guest

    Hi, all!
    Can anybody help me with enormous Drop Call rate due to O&M intervention on one BSC (Alcatel) – counter C180c? On Air-interface one BTS with high drop due to MC14c (BSS problem) exists. Descriptions of both counters (C180c & MC14c) are indistinct, but what (which unit) can initiate call relese in such case?

    Thank you very much

    #54600
    pix
    Guest

    usually, it is a drop that occurs when a hardware is lock or reseted, such as TRX lock or TCU reset.
    If nobody did it, then it means that the software is doing it automatically. To troubleshoot this, you need RTAC I suppose.
    Does it happen on 100% the cells of the BSC ? not in other cells of other BSC ?

    The problem can therefore come from the BSC itself, AterMux interface or transcoder. I wouldn’t see anything else. You can’t find anything in O&M alarms ??

    #54601
    hvicente
    Guest

    hi all

    Can you help me please…
    After adding more devices to HR pool it raising a follow alarm:

    A3/SWDEV “PRBSC01B23I06K0” 259 100210 1629
    RADIO TRANSMISSION TRANSCODER POOL MEAN HOLD TIME SUPERVISION

    TRAPOOL NOTRA
    HR 192

    A3/SWDEV “PRBSC01B23I06K0” 265 100210 1710
    RADIO TRANSMISSION TRANSCODER POOL MEAN HOLD TIME SUPERVISION

    TRAPOOL NOTRA
    FR 125 can u tel me how can i calculate the Average hold time for pool my pools HR=384 dev and FH=1152 dev…

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.