Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ANBSP analysis in Ericsson MSC

Viewing 15 posts - 1 through 15 (of 19 total)
  • Author
    Posts
  • #54573
    Ram
    Guest

    In eric AXE MSC nodes, EXROP data of some incoming routes does not have the BO value. Then how they can accept the incoming levels. Or how the BO is assumed for these routes.

    thanks,
    ram

    #54574
    frank
    Guest

    The BO is not assumed for these routes. you can change that with EXRBC

    #54575
    Ram
    Guest

    Hi frank,
    i am aware of that. But still there are some incoming routes with no BO. They also handle incoming calls. how this is possible.

    thanks,
    ram

    #54576
    SK
    Guest

    Hi Ram,

    Check the EXROI Command.
    U will understand.

    #54577
    Cheshire
    Guest

    BO=0 is assumed in this case of absence of BO in incoming route parameters

    #54578
    Nthabie
    Guest

    Im having a hard time defining a route between two exchanges. How do i do it

    #54579
    DANEKABA
    Guest

    HELLO
    CAN I HAVE SOME DOC ABOUT ERICSSON HARDWARE MSC.

    #54580
    nba
    Guest

    goto http://www.scribd.com, sign in and search “MSC ericsson” you will find alot of description

    #54581
    harshesh
    Guest

    hw can i do an analysis on b no. in ericsson msc…please give me a command wise description if possible …

    thank you,
    harshesh

    #54582
    Rony
    Guest

    Hi,

    I need to create static IN triggering for any called number in B table.

    What is the command for it.

    #54583
    Josh
    Guest

    hi…i am an amatuer in Ericsson switch commands….can anyone help me find some related articles to clear my doubts in ericsson switch commands.

    #54584
    Shweta
    Guest

    Hi.i am novice..need to understand B number analysis in ericsson..
    what are the different parameters like BNT…and how to trace a particular level in the table

    #54585
    adnanbinsultan
    Guest

    I learning to opperate ericson switch
    how firstly process can i want seek it.

    #54586
    somasekhar
    Guest

    Hi.i am novice..need to understand B number analysis in ericsson..

    #54587
    als
    Guest

    Hi everyone,

    Is it possible to have a Least Cost Routing feature with ericsson MSC ?

    if it’s possible may i have a feedback from this implementation ?

Viewing 15 posts - 1 through 15 (of 19 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.