Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CP and IOG software version on AXE10

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #54359
    Abalo
    Guest

    ? command to list CP and IOG software version on AXE10. Thanks.

    #54360
    TB
    Guest

    The CP software is given on the exchange header along with the correction packages that are loaded, but for the SP software your going to need to log onto the IOG and print it, unfortunately I dont have the command at hand, though ALEX is a great help in these situations 🙂

    #54361
    Indranil
    Guest

    PCORP:block=Missra; & then upload the output to MISSRA decoder,
    then u ll get the detailed revision.
    in case ioexp; printout u can check header information but it can be changed by the user who has done upgrade /update.
    so, reliable way is to use MISSRA decoder.

    BR//

    #54362
    TB
    Guest

    You can use the command for the SP software print, which is LASSP, then check up on your alex for the additional commands (its normally spg and node)

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.