- This topic has 25 replies, 1 voice, and was last updated 8 years, 8 months ago by Bijoy.
24th October 2008 at 13:24 #54333JoseGuest
Since CSSR is not a standard KPI, I have made up a formula which is:
It works fine, but sometime it gives over 100 % in the TCH part, does anyone know is it correct forumla ????
Jose3rd November 2008 at 06:48 #54334risaGuest
CSSR = SDCCH success seizure * ( 1- SDCCH drop) * TCH success seizure.
Hope it helps!20th November 2008 at 10:32 #54335Raghvendra SinghGuest
CDMA & GSM Kpi formulas9th December 2008 at 07:07 #54336danielleGuest
(TCASSALL/TASSALL)*10028th April 2009 at 13:44 #54337DouglasGuest
AM A RADIO PLANNER AND OPTIMISATION INTERN IN VODACOM SA
WHAT IS CSSR STAND FOR AND WHAT IS IT?28th April 2009 at 16:02 #54338kamazGuest
@ risa: it’s an ALU Formula, they dont have the same approach.
@ Jose: if you have a Direct Retry in your Network you will have this behaviour in the TCH part. It’s simple, when we perform a TCH Request in one cell (cell1) but due to congestion we perform a Direct Retry to another cell (cell2), in addition, we have a TCH Att in cell1 and a TCH Succ in cell2 (not in cell1). So TCH Success in cell2 will be over than TCH Att in the same cell (cell2) ==> TCH Success Rate over than 100%.29th April 2009 at 21:09 #54339FleurivalGuest
i would like to know how i can calculate the drop calls in the alcatel MSCSs29th April 2009 at 21:10 #54340Jean ThomasGuest
can someone tell me some ways to improve processes within performance area : KPI definition and performance weightings.16th May 2009 at 09:05 #54341DanielGuest
Can help to explaint what is the CSSR stand for an from where can i have a better understanding in all the radio terms ?
Daniel .16th May 2009 at 18:24 #54342sathiyarajGuest
what is the meaning of CINR …29th July 2009 at 04:35 #54343hussainGuest
can u explain me the meaning of TCASSALL14th August 2009 at 11:29 #54344Sanjay HiraGuest
Is there a way to convert PS Erlang to megaytes?17th August 2009 at 11:07 #54345WICOPGuest
I think that’s not good solution. Because Very many parametrs depending to result (Erlang to Mbytes). You need formula for PS traffic by kbit/s.
What kind of system using?19th August 2009 at 15:55 #54346HoseaGuest
CSSR stands for Call Setup Success Rate20th August 2009 at 08:53 #54347WicopGuest
Do you know formula for PS and HS traffic by kbit/s