Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

power control parameter setting

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #54317
    YAN
    Guest

    dear
    can any body help me on what basics I should put the power control parameters .

    #54318
    Pix
    Guest

    “on what basics”

    What does it mean ?

    Study your power control algorithms and your default values for each PC parameters.
    Apply the default values for each cell, and further optimize them if needed.

    #54319
    YAN
    Guest

    dear PIX
    what i meant by basic is that how vendors RN engineers decide how make the PWCR parameters settings.
    best regards

    #54320
    pix
    Guest

    well, they just start with default values.

    Then, when they have time, they study the PC algorithms to see how they can improve the default values.

    #54321
    QIP
    Guest

    as Pix said; you start with the default; usually the defauls usually means “makes sense” at least in the time they were first set.

    then you make usually traces; network, bsc or cell level.. wehre you can see whats the average rxlev or txlev for both site and mobile… and you change your PC parameter accordingly.

    you can ask your vendor… since some vendors have some extra parameters that help optimize PC.
    regards

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.