Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOKIA alarms

Viewing 10 posts - 46 through 55 (of 55 total)
  • Author
    Posts
  • #54262
    anil
    Guest

    pl’z foreword channel

    #54263
    PREM RANJAN
    Guest

    to solve
    1. channel failure rate above defined threshold(CFR).
    2. Mean holding above defined threshold(MHT).
    3. CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD
    4. INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILES

    #54264
    Tahir
    Guest

    how we clear BCCH alarm

    #54265
    Juan valdes
    Guest

    solucion traffic channel activation failure

    #54266
    SAMEER
    Guest

    PREREQUISITES STEPS AND PROCEDURES for Resolution of 7725 alarm

    TRAFFIC CHANNEL ACTIVATION FAILURE.

    #54267
    hirdesh kumar
    Guest

    How we can reduce WORKING SDCCH CHANNEL RATIO BELOW THRESHOLD alarm

    #54268
    Mai
    Guest

    Reference clock mingssing

    #54269
    Joseph De light
    Guest

    i make the Deletions of several sectors, this were made per plan in several BSC leaving only the OMUSIG WORKING but now the alarms in the BSC are not reflected even when they are created and visible in the BCF.
    Can someone please tell me what could be the problem. This was done in FLEXI MR AND FLEXI BTS +

    #70592
    Wasfi Mabardi
    Guest

    Hi,
    What does this alarm mean,
    INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILES
    How can I solve it?

    #73503
    Mohamed M
    Guest

    I have this alarm on NOKIA SRAN BTS fgor 2G (One or More TRXes didn`t receive Systed Information from BSC) and the following are the status of TRXes on this cell :

    TRX-001 U WO 19 0 – MBCCH+CBCH P 1
    TRX-002 U BL-SYS 60 0 – 0
    TRX-003 U BL-SYS 28 0 – 3
    TRX-004 U BL-SYS 56 0 – 2

    What`s the solution ? and is it BSC level or BTS level?

Viewing 10 posts - 46 through 55 (of 55 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.