Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOKIA alarms

Viewing 15 posts - 31 through 45 (of 55 total)
  • Author
    Posts
  • #54247
    sunil kumar singh
    Guest

    i m in o & m, want to know various commands for bsc.

    #54248
    eli
    Guest

    how can i fix this alarms?
    1. channel failure rate above defined threshold(CFR).
    2. Mean holding above defined threshold(MHT).
    3. CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD

    How can i get the NED?

    #54249
    Ashish kumar
    Guest

    Q 1-what is the MEAN HOLDING TIME BELOW DEFINED THRESHOLD.

    Q 2-channel failure rate above defined threshold.
    Q 3-CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD.
    Q 4- INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILES.

    plz help i’m working with NSN project frm last 1.5 yrs.i’m working as an O&M engineer.i want NED & All BSC/BSS MML commands

    #54250
    santosh
    Guest

    PLS GIVE THE BRIEF DETAILS ON
    1. channel failure rate above defined threshold(CFR).
    2. Mean holding above defined threshold(MHT).
    3. CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD
    4. INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILES

    and how to resolve the same .

    #54251
    SWATI SINGLA
    Guest

    Hi

    I have been working on SDCCH blocking and hence on 7725 alarm. If the alarm comes during the dynamic SDCCH channel allocation, then what will come in the supplementary information of this alarm (0 or 1)?

    #54252
    Marious Nathaniel
    Guest

    Sir,
    i have mean time holding below threshold alarm and traffic activation failure alarm on sector 2,3.trx4 and 6.help me with what to do

    #54253
    Taofeek Mustapha
    Guest

    How can we resolve Channel Failure rate and Mean Holding time alarm on FlexiEDGE BTS?

    Also for RSSI alarm

    #54254
    amit
    Guest

    hi
    7725 alarm is coming due to info 0
    and tch channel are going in Bl-sy state.

    plz help how to rectify for fail due to tch Fail(supplementary info 0)

    #54255
    Ali Sim
    Guest

    Dears i receive this alarm can any one explain the problem?
    BSC710N_DHK BCF-0081 BTS-0811 ENVIR 2014-03-01 02:57:49.43
    * ALARM G4960A
    (18493) 7712 WORKING SDCCH CHANNEL RATIO BELOW THRESHOLD

    #54256
    Pritam
    Guest

    Hi Tech team,
    for CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD Supplementary information fields 1 shows 02 which is failure on sdcch channel 90%.I found the resolution by not defining the ch with sdcch.example sectA has 4 trxs.TRX 1 we have sdcch and trx 2 ch0 has also sdcch.after defining trx2 ch0 as tchd alarm disappear.My question,is this alarm trigger on sdcch for wrong TRX and channel definition and what is the logical reason

    #54257
    Ambrish Kumar Mishra
    Guest

    7725 alarms where additional info is 02 due to this data services are affected

    ALARM DESCRIPTION:
    TRAFFIC CHANNEL ACTIVATION FAILURE

    #54258
    jen
    Guest

    I ALSO HAVE THIS ALARM: 7725 TRAFFIC CHANNEL ACTIVATION FAILURE. I TRIED TO RESET THE TRX AND EVEN BLOCKED THE RTSL BUT ALARM APPEARED IN A DIFFERENT RTSL.

    #54259
    chaman kumar
    Guest

    What is CHFR alarm rectification process.

    #54260
    Ashok Singh
    Guest

    WHAT IS IMPACT OF “ALARM THRESHOLD FOR NUMBER OF CHANNEL SEIZURES” IN NOKIA OPTIMIZATION.

    #54261
    srinivasarao
    Guest

    why mean holding time above/below defined threshold alarm comes and how to clear this

Viewing 15 posts - 31 through 45 (of 55 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.