Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HO Incoming Fail inter BSS Alcatel

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #54206
    Kamel
    Guest

    Hello all;
    How r u?
    I have a HO incoming problem inter-BSS Alcatel.

    The problem is:
    After integration of new BSC Alcatel or mutation of site between two different Alcatel BSS the value of HO Incoming fail cause BSS increase.
    We use a Siemens Switch in our network

    I hope u can help me to resolve this problem.
    Thanks

    #54207
    pix
    Guest

    hello kamel,

    Could you tell whether it is a BSS failure during HO preparation or a BSS failure during a HO execution ? What’s the reference name of the indicator you’re looking at ?

    I doubt there is any kind of uncompatibility between alcatel bss and siemens nss, so the solution certainly lies in your NSS and OMCR settings.
    I can’t point exactly what you should check, but you could check out those:
    – external LAC / CI are defined in neighbor OMCR
    – CI & LAC definition in MSC, routing tables, etc. (i don’t know nss..)

    Regards,
    Pix

    #54208
    Nguyen Ngoc Thuy
    Guest

    Could you tell whether it is a BSS failure during HO preparation or a BSS failure during a HO execution ?

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.