Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Load GPU on terms of PDCH

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #54199
    Toofy
    Guest

    Can you specify the dimensionning method of GPU on terms of PDCH?

    On RNO we have only the GPU Load on Terms of DSP.

    I think that the limitation of PDCH on GPU appears before the limitation of GCH.

    If we connect 4 AterMux Data to the GPU, we will have PDCH Limitation on the GPU before the GCH Limitation.
    So, when we must use 2 GPU?

    what’s the KPI we must follow to say if yes or Not must use multi GPU configuration?

    Any one have a method to quantify the PDCH Load on GPU?

    Thks

    #54200
    pix
    Guest

    I answered in the other thread, please have a read over there.
    I’ll try to answer more precisely later.

    #54201
    toofy
    Guest

    any news about this problem?

    #54202
    pix
    Guest

    you’re not happy with my answer ?

    #54203
    toofy
    Guest

    excuse me pix, but you haven’t answered to my question:

    How we can follow up PDCH Load on the GPU

    #54204
    pix
    Guest

    i’ve written a huge post to answer you, but it got erased.

    and on top of that, i answered in another of your thread, where you asked the exact same question.

    so YES, you can find these indicators in RNO, under the object=GPU.
    Ater congestion
    GCH usage
    processor load…

    etc.
    all this, per GPU.

    #54205
    toofy
    Guest

    Ok, thank you pix.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.