Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High rate of Ping Pong during Handover

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #54046
    Thierry
    Guest

    Hi all,

    Could you explain me raison of ping pong during handover (case of cell belonging to the same site, case of site belonging to different sites) and what are the solution to reduce that. I work on Ericsson equipment.

    Regards,

    Thierry

    #54047
    e
    Guest

    please check HO parameters and prio of HO.

    #54048
    RH
    Guest

    Hi,
    Ping pong can happen due to no dominant …mainly due to poor Downtilting.In that case you will find lots of neighbors which have strong level.
    So,Downtilting should be done more carefully.
    U can increase the ho_margin in case where the ping pong HO happens (to prevent it.)

    #54049
    Opt
    Guest

    You could also do parameter tuning to avoid period: increase the handicap and the the period during which this handicap is applied to prevent the MS from going back to the old cell, at least that works for ALcatel systems.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.