Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

handover intra BSC

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #54030
    ozibi2000
    Guest

    Hi all,
    with Ericsson,i have 2 BSC’s (bsc1 and BSc2)and 1 MSC.my problem is that sites on bsc2 cant make handover with sites on bsc1.i difine neighbour ext and int well.help please

    #54031
    pix
    Guest

    hello,

    you need to define neighbor cells and LAC in the MSC. you should focus on MSC, that’s certainly where the mistake is.

    regards
    pix

    #54032
    Narchai
    Guest

    If LAC of BSC1 and BSC2 not same value, MSC must define neighbor LAC also.

    #54033
    Ram
    Guest

    Hi ozibi,
    Check for the CGI, BSIC, BCCH values of cells and the neighbors in both the BSCs. If the o/g calls are normal from both BSCs, then no need to check with MSC. Since they belong to same MSC, check completely the external neighbor list for each cells and check with the neighbor BSC.

    Hope this clarifies,

    thanks,
    ram

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.