Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High SDCCH Assignment Failure

Viewing 15 posts - 31 through 45 (of 50 total)
  • Author
    Posts
  • #53438
    Mani
    Guest

    Thanks Pix & Nk,
    let me do check and impelement given information and i will come back to you. i am ZAIN employee working on NSN & Motorola.

    #53439
    james
    Guest

    Hi, i have a cell with very HIGH_SDCCH_ASS_FAIL. i have checked on the CDR which is ok below 1%, quality is super, no visible fault on the TRXs and the cell is not a VSAT one. what action can you recommend.

    #53440
    Pix
    Guest

    Hi James,

    What is the value of SD Asg Fail rate ?

    at busy hour ?
    daily average ?

    which vendor are ou working with ?

    #53441
    Rex
    Guest

    Hi,
    the default parameter in our network of param TX_INTEGER is 50. In cells located in mountains with high SDCCH Assignment Failures, if we reduce the value of TX_INTEGER to 32, will that decrease SDCCH Assignment failures?
    Regards,
    Rex

    #53442
    Rex
    Guest

    Anyone?

    #53443
    Pix
    Guest

    Probably not… but you can try 🙂

    #53444
    HSH
    Guest

    Hello Rex,
    Do not forget that this Parameter (TX_Integer) is working with S parameter that depend on the type of your CCCH Combine type; if you have CCCH combined or not,
    any way try and inform us with the result,

    Regards

    #53445
    Francis
    Guest

    I am experiencing very high TCH assignment failure on a cell which is located on a hill and I am using ZTE equip. can you please help me on how to solve this problem

    #53446
    james
    Guest

    The SDCCH_ASS_FAIL_RATE_BH=11.29
    The SDCCH_ASS_FAIL_RATE_AVG=6
    Vendor=Alcatel zain

    #53447
    AYAT
    Guest

    Dears
    also i face the same problem very high SDCCH assignmnet failure????? i can not know why

    so could you help me

    1- why sdcch assignmnet failure

    2-how we can reduce it ???

    #53448
    Manoj Kumar Singh
    Guest

    Handover is getting failed due better cell.

    #53449
    abhi
    Guest

    how we get abis traces?

    #53450
    Tejbir Rathi
    Guest

    Hello.

    i want to know the name of that parameter by which we change the TRX Priority of tch in ericsson system.( TRP in nokia system.

    #53451
    Malay
    Guest

    SDCCH assignment completed but Call is not established..Why??

    #53452
    Pix
    Guest

    Malay,

    Probably a TCH Assignement Failure, either due to TCH congestion, due to Radio failure, or due to TRX failure.

    Regards
    pix

Viewing 15 posts - 31 through 45 (of 50 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.