Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hang T1/E1 channels?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34356
    V.H.
    Guest

    Hello,

    I know that FXo analog ports may some time not detect properly busy signals or hang-ups, so thay may remain open (hang).

    Is there a chance that the same may happen with E1 RBS channels or PRI? I didn’t think so as this signalling is digital but I read some postings on mailing lists talking about “stuck” channels on T1/E1’s.

    Is there a chance that these phenomena took place because some applications require digital channels to be split to analog via channel banks? (Where digital trunks are not available for example).

    Any input would be greatly appreciated.

    Thank you,
    V.

    #34357
    masood
    Guest

    could you please mail me your hardware litsts you used for VOIP/Voice?
    When MUXs are suffered bandwidth then it may hang. Just reset the mux and cb.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.