Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NSEI —-???

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #53343
    Mohit
    Guest

    Hi All…

    Can anybody explains the parameter NSEI (New Establishment Causes Support)..NOKIA BSS..its default value is either Y/N…
    Wat is the effect of keeping its value Y and or N…
    is it used in Call establishment or it is a Handover related parameter..

    Mr. Pix can u give some idea…??

    Regards,
    Mohit

    #53344
    Mohit
    Guest

    Srry its NECI not NSEI…

    #53345
    Host
    Guest

    if anyone could explain also the parameter NSEI and NSVCI.
    Thanks

    #53346
    Tushar
    Guest

    NSE identifies a group of NS-VCs in the BSC.

    The BSC uses NSEI to determine the NS-VCs which provide service to a BVC.

    At the BSSGP level the NSEI has only local significance at each end of the Gb interface.

    #53347
    dariush
    Guest

    Hi,
    in Channel request message(MOC or Answer to paging) if NECI=off 3bit used for establishment cause and 5 bits used for Random reference in the case of NECI = on vice versa so we have more Establishment cause messages in situation.

    #53348
    Mohit
    Guest

    Hi Dariush,

    Do u mean if we have NECI=ON, the call establishment rate is increased…??

    Does it effect the HOSR also..??

    regards, Mohit

    #53349
    Peyo
    Guest

    cause for access demands (RACH) is coded on 2 octets. this mean it can take up to 256 value (0 to ff in hexa). With NECI “off” not all cause are considered valid (which means not all value for access demand are acceptable) , With NECI “on” all cause are acceptable (even if theory there are still 3 or 4 cause that are reserved for future used). There’s strictly no effect except on phantom Rach. if decoded cause for this phantom is one which was discraded when NECI “off” it will no longer be discarded.

    #53350
    lubaibiws@gmail.com
    Guest

    what is NSEI????

    #53351
    Optim
    Guest

    If NECI is OFF . . . you will see NO half rate traffic my friend !!

    rgrds,

    #53352
    Vikas Sehrawat
    Guest

    In GPRS protocol stack, every unique BSSGP Virtual
    Connection (BVC) that is NSEI+BVCI for each
    GPRS cell belongs to Network Service Entity (NSE).
    NSEI uniquely identifies every NSE. Generally, one
    BSC is divided into one service entity.

Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.