Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

QoS in PSTN

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #34336
    Catalin
    Guest

    Would you be so kind as to tell me what are the parameters that would measure quality of service in a PSTN Ericsson Axe 10 Local Exchanges (ASR,CCR,BHCA,….)?
    Thank you very much.

    #34337
    Mehmet Beyaz
    Guest

    Hi Catalin,

    For PSTN,
    CSSR, CCR, Call Setup time, blocking rate.

    Regards

    #34338
    shalini
    Guest

    How can I increase the CCR of my network,or else what all accounts to CCR of a network?

    #34339
    Shalini
    Guest

    Hi Shalini,

    In order to increase the CCR you need to increase the successful calls. Or decries the unsuccessful calls. For formulation consider tecnically successfull call.

    Regards
    Mehmet Beyaz

    #34340
    shalini
    Guest

    what has been an average value of CCR for a healthy network been observed?

    #34341
    Shalini
    Guest

    Hi Shalini,

    CCR must be above 96%.

    Regards
    Mehmet Beyaz

    #34342
    shalini
    Guest

    My network never gives more than 46-50%, atleast I want to to increase the CCR of the traffic purely catered by my own network, because in most of the cases I have to talk to other network operator’s network wherein many elements come in picture and the behaviour of far end exchange is not i my control..so help me knowing the factors which can increase the CCR of my internal network

    #34343
    Kristina
    Guest

    Hi,
    Would You tell me how can i measure QoS parameters in operator’s network?

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.