Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MAIO Issue

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #53148
    MAIO
    Guest

    Hi All,

    Can I define random maio for cell in eric system.

    eg 666 site

    Cell A 0,11,2,13,4
    Cell B 5,1,7,3,9
    Cell C 10,6,12,8,14

    I know that there are too many hits in this maio plan… but I have only 15 freq,,, hence this is the max. I can d.

    Please reply soon..

    BR

    #53149
    pix
    Guest

    you have 15 MA frequencies to put on a site which contains 15 SFH TRX’s ? This is mad !! There is going to be a terrible call drop rate, due to adjacent channel interference (probably uplink, mostly)

    you should remove 7 TRX’s if you want good QoS 🙂

    #53150
    Alex
    Guest

    Hi Pix,
    I think it is possible to have 10 TRXs per cell.
    3 TRXs just carry BCCH in the separated Channel Group number 0 without hopping and 7 TRXs can be shared between 3 sectors with SFH e.g. configuration can be 3+4+3.
    Please note to this formula:
    “number of frequencies in the HFS” >= 2*(number of TRXs in the CHGR)

    BR,

    #53151
    pix
    Guest

    alex, yes, i was talking about SFH TRX, hence not taking into account the “bcch” trx.

    the actual rule, in SFH 1×1, is to have nb of “tch” TRX < 12% * nb of MA frequencies. otherwise the soft blocking is going to be over the top ! in "MAIO"'s situation, i strongly recommend a BBH solution, not SFH.

    #53152
    ali abbas
    Guest

    how the priority of MAIO is decided.Where is SFH and Baseband are used.

    #53153
    Victor
    Guest

    I think it´s possible to have 15-Freq MAL for 15 SFH-TRXs, but your must create a MAL with non-consecutive ARFCNs to avoid collisions.. (if you have enough #channels, obviously).

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.