Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AXE810 and Caller ID

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #53050
    Hamed
    Guest

    Dear All,

    My question is about caller ID supporting by AXE810.

    In our network we use AXE810 as a transit switch between PSTN and Local network.
    AXE810 connection to PSTN is through #7 Links and to local networks(PBX’s) through PRI and
    our PBX support caller ID.

    how i can active caller id in AXE810 for showing Extension numbers when go to PSTN and when connect from one PBX to other PBX?

    if any procedure avalable who can send for me?

    Best Regards.

    #53051
    Hero
    Guest

    In AXE if u wil check the anbsp:b=XX-###; there should be one parameter i.e.”nw” shold be present.

    arun_sakre@yahoo.com

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.