Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Blocking probability

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #34322
    Joe Wire
    Guest

    What % blocking probability do most folks use with any of the following scenarious:

    1) Voice traffic only

    2) data Traffic Only

    3) Combined voice + data

    I am looking at public networks type designs.

    Thank you to all of you for your anticipated help!

    #34323
    Fletcher
    Guest

    Voice — 2%
    Data — 5%

    #34324
    Oswaldo Rosero
    Guest

    For design purposes:
    Voice 3%
    Data 5%

    Normally, after you finish your design you must retouch it depending on the market acceptance and demand of quality. You must remember that your definitions impact the capital expense of the project. You should also look upon the $$$ availability. Sometimes it forces to increase the blocking percentage in order to be within the feasability margins. Watch out!!

    #34325
    Rob Carlisle
    Guest

    Most US LD telecoms use either 1% or 0.5%
    blocking in the busy hour for their LD traffic (on their final circuits).

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.