Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

3g

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #52954
    HO from WCDMA to GSM faiure
    Guest

    dears
    can any body hlp me with the phenomena that I faced when HO occur from 2g to 3g is successful but vise versa is fail most of time what could be the reasons??????

    #52955
    peyo
    Guest

    what do you mean by “fail”? can you see 2G neighbors when on 3G?

    if no check for classmark update message (with K15) when arriving on 3G cell. Some handset are failing on that point.

    what brand of MS are you using?

    #52956
    Mik
    Guest

    Check the MAP versions of
    AC 11, handoverControl,is set to version 3 on MSCs
    AC 14, infoRetrieval, set to version 3 on MSCs & HLRs

    #52957
    HO from WCDMA to GSM faiure
    Guest

    dear
    Thanks for the response but I would like generally the reason for the HO failure from one way WCDMA to GSM

    #52958
    Meyram
    Guest

    Hi
    can anyone help me where can I get whole information on 3G (features, what kind of equipments are required,
    whole software conception…etc.

    Thanks in advance.

    #52959
    Git
    Guest

    Hi,
    First of all 3g to 2g neighbour, the database should be defined in MSS, RNC.
    in MSS, the external LAC, MSCID of 2G neighbour should be defined.
    in RNC, the information about 2G (like LAC-CI, bcch no, bsic, etc) should consisten with real 2G database.

    #52960
    HO from WCDMA to GSM faiure
    Guest

    Git
    thanks for the response
    But i would like to know the reason related to protocol between 2G and 3G not the data base .

    #52961
    Chathura
    Guest

    I’ve listed down some Common reasons for 3G-2G handover failures
    1). Improper neighbour definition-this can be verified from SIB 11 message
    2). Wrong settings for event 2D thresholds & TTT (time to trigger values)
    3). Wrong Settings for event 3A (thresholds & TTT)
    4.) Inaccurate Timer settings (eg for T309 it is recommended to have more than 5s)

    above are related to wrong configurations, remember that there could be other reasons as well

    furthermore if we consider the different phases of the HO process, followings can be identified as some of the reasons for failures;
    1. failures During Preparation phase (eg- due to no radio resources in target cell)-these are generally called as “CS-iRAT-HO_Failure_1”

    2. failures in IuB & generally called as “CS-iRAT-HO_Failure_2”

    3. Due to NBAP link failures

    thanks

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.