Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HO Margin – Ericsson

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #52817
    m12
    Guest

    hello all,

    i need to know how best to increase HO margin in Ericsson BSS for the purpose of dedicating some cells as dorminant ones in some locations where there are no dorminant ones.

    please assist me with the right parameters – are they just LHYST and KHYST??

    m12

    #52818
    Ater
    Guest

    If I understand well what you trying to do:
    Increase the CRO of the cell that you want as serving cell in the desired area(leave the PT=0) Switch the cell to a higher layer and increase the layerthr. The first change assure you that the comunication begins in the desired cell and the second that the comunication continues in that cell
    You need to be carefull and try with small steps first
    Also check if in that area exists a border of LAC border

    #52819
    m12
    Guest

    thanks Ater

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.