- This topic has 9 replies, 1 voice, and was last updated 1 year, 4 months ago by Wallis Dudhnath.
9th April 2002 at 11:05 #34294Pawan GoswamiGuest
I am putting together a configuratoe for prepaid system for 2 and 2.5 networks. Any suggestions for traffic engineering for a prepaid system will be highly appreciated14th April 2002 at 17:24 #34295Radhakant DasGuest
Can you pl. mention what sort of prepaid solution you are going to configure, and on which protocol?15th April 2002 at 09:20 #34296Pawn GoswamiGuest
Hi Mr Das
The prepaid system is SCP based and will be CS1R or CAMELII based. What I am looking for is standard traffic inputs for 2 G and 2.5 G which I can use for the configuration tool15th April 2002 at 11:04 #34297Radhakant DasGuest
will it be on GSM based /cellular environment.16th April 2002 at 09:30 #34298PawanGuest
Yes the envoirnment will be GSM As you are aware CAMEL and INAP are protocols for GSM networks.4th May 2002 at 16:51 #34299RayGuest
I thought the pre-paid traffic should be dependent on the operator’s request. Eg, the operator expects 20% on prepaid, then you take the total subs cap multiply by this to calculate pre-paid sub and dimension your SCP to handle the busy hour query.23rd December 2002 at 10:45 #34300Anindya SahaGuest
Could you please tell me if it is possible on the Nortel CS1R to send a Connect on a TCAP-Continue? I think currently it is not supported. Do I have to send it in a TCAP-End? If I cannot send it in a TCAP-Continue, how do prepaid systems monitor the duration of the call?22nd December 2018 at 12:13 #34301Wallis DudhnathGuest
Apologise for the late response to this question. In the past I used to
dimension and engineer Intelligent Network (IN) / PrePaid system (and solutions).
To help with dimensioning I would ask the following questions to prospective Communication Service Providers (CSPs):-
-BHCA for Mobile users
-Number of Customers (e.g. 5 Million, 100 Million, etc..)
-Support for Voice Services using: CAMEL Phase 2, Phase 3 or Phase 4
-Requirements for any supported proprietary signalling in the Network
-Data Services using Gy / Gx / Sy / Diameter (Diameter Credit Control Application – DCCA)
-IP / Sigtran connectivity
-Complexity of Tariff Tables for Voice / Data Bundles
-Required Transaction for CAMEL signalling and Diameter during the Busy Hour
-Traffic rejected (e.g. new) once the IN / Prepaid exceeds 90%
-Convergent solution: Convergent Account – Prepaid / Postpaid / Hybrid configuration
-Activation or use of Optional Features (Vendor specific)
-Baremetal or Cloud solution (Linux, Openstack(), Docker(), etc..)
-Event Data Records (EDR) Processing during the Busy Hour
-Transactions for the IN / Prepaid administration solution
-% of Traffic for Voice(MO, MT, CF, etc..), Data, SMS/USSD/etc.. Notification Services, Roaming, SMS/MMS, VoLTE/ViLTE, Voucher Updates (updates, status checks, etc..)
VBR/ Wallis Dudhnath4th March 2019 at 16:30 #34302Wallis DudhnathGuest
Just looked at the following question:
Could you please tell me if it is possible on the Nortel CS1R to send a Connect on a TCAP-Continue?
Short answer: No.
The Continue() method is used to request the SSF to proceed with call processing at the DP (Detection Point) at which it has previously suspended call processing to await SCF instructions (i.e., proceed to the next point).
The Connect() method is used to request the SSF to perform the call processing actions to route or
forward a call to a specified destination.
Connect() and Continue() are different methods used by INAP / CS-1 / etc..4th March 2019 at 16:41 #34303Wallis DudhnathGuest
Following methods() are used by IN – Intelligent Network – systems / solutions that are based on ETSI Core INAP/CS-1:-
VBR/ Wallis Dudhnath