Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Same LAC for 2 BSC’s

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #52444
    HUNI
    Guest

    can we have same lac for two BSC’s?

    #52445
    Vanderley
    Guest

    Yes you can. Just be sure that the CGI are unique.

    #52446
    HUNI
    Guest

    Thanks Vanderley

    what is CGI stands for?

    #52447
    John
    Guest

    Be aware of e.g. increased paging load if Location Area becomes too big. It can lead to some unexpected behivour in your BSCs; depending on how well the overload protection has been implemented in BSC software.

    #52448
    R
    Guest

    @HUNI

    yes we can have same LAC for two BSCs but these two BSCs should be in the same MSC.

    If the two BSCs having same LAC are in two different MSCs then it will lead to the problems.

    #52449
    Vanderley
    Guest

    CGI – cell globl
    = MCC+MNC+LAC+CELL_ID

    #52450
    Vandrley
    Guest

    CGI – cell global identity
    = MCC+MNC+LAC+CELL_ID

    #52451
    Mazin
    Guest

    yes you can, but also you should consider the number of TRX otherwise you will face lack of paging resource.

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.