Same LAC for 2 BSC’s This topic has 7 replies, 1 voice, and was last updated 14 years, 6 months ago by Mazin. Viewing 8 posts - 1 through 8 (of 8 total) Author Posts 16th May 2008 at 13:56 #52444 HUNIGuest can we have same lac for two BSC’s? 19th May 2008 at 14:22 #52445 VanderleyGuest Yes you can. Just be sure that the CGI are unique. 19th May 2008 at 19:56 #52446 HUNIGuest Thanks Vanderley what is CGI stands for? 20th May 2008 at 08:41 #52447 JohnGuest Be aware of e.g. increased paging load if Location Area becomes too big. It can lead to some unexpected behivour in your BSCs; depending on how well the overload protection has been implemented in BSC software. 20th May 2008 at 12:03 #52448 RGuest @HUNI yes we can have same LAC for two BSCs but these two BSCs should be in the same MSC. If the two BSCs having same LAC are in two different MSCs then it will lead to the problems. 21st May 2008 at 15:03 #52449 VanderleyGuest CGI – cell globl = MCC+MNC+LAC+CELL_ID 21st May 2008 at 15:04 #52450 VandrleyGuest CGI – cell global identity = MCC+MNC+LAC+CELL_ID 25th May 2008 at 21:01 #52451 MazinGuest yes you can, but also you should consider the number of TRX otherwise you will face lack of paging resource. Author Posts Viewing 8 posts - 1 through 8 (of 8 total) The forum ‘Telecom Design’ is closed to new topics and replies.