Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Faulty TRX

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #52141
    MKT
    Guest

    Hi all,

    If a TRX/TRU in cell goes faulty, then the BTS/BSC immediately blocks it.
    If due to any reason we cannot replace the TRX then:

    1) Will there be any bad effect on radio quality due to that TRX.?
    If Yes,

    Then why? Since the TRX is already blocked by BTS/BSC is that TRX is still transmitting something(say residual signal)

    2) If an O&M person from BSC blocks the said faulty TRX then,

    Will the latter case will be somewhat better then former?

    Regards

    #52142
    Shahnawaz
    Guest

    it depends,if the TRX goes faulty, means it is out of service[off],then this TRX will not transmit any thing, it only cause congesstion or blocking, but if the TRX is powered up but its effeciency is degraded then it will cause problems like call drops etc, and even if a TRX is been blocked by the O&M person then it will certainey result in loss of TCH or blocking this is wat happens with Alcatel/Motorola, for other vendors i cant say any thing.hope it helps.

    #52143
    pix
    Guest

    the fact that the BSC blocks the faulty trx is quite interesting… it doesn’t work this way in alcatel bsc.

    if a trx is blocked, by o&m or by bsc, there shouldn’t be any degradation of kpi’s, except tch congestion and incoming ho rejected due to congestion. it would also impact gprs establishments and throughputs.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.