Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

tch blocking and tch congestion

Viewing 9 posts - 91 through 99 (of 99 total)
  • Author
    Posts
  • #52114
    Seles83
    Guest

    Yep,

    There is no dual band 900/1800…anyone with the know of syncronising rbs 2106 & 2116…i am stuck with the connection part..

    #52115
    Atanu
    Guest

    Hi Krish,
    One thing u can implement is to increase the value of Cell reselect hysteresis from 6 to 8.

    #52116
    Raju sonix
    Guest

    Q :- TCh congestion ,cssr low ,no hardware foulty,No E1 error,60 % utilization

    pls give me solution

    #52117
    Saurabh Singh
    Guest

    what is tch and sdcch drop?
    how costomer are affected?

    #52118
    nitin
    Guest

    hi saurabh

    on air interface call is established or maintained on the SDCCH or TCH radio channels respectively.
    as of some coverage or hardware problem user wouldn’t be able to get these channel on air interface and hence these channel drops i.e user can’t be able to maintain or establish the a call.

    Conclusion is the drop of a call and definitly suscriber will affected.

    #52119
    Akin
    Guest

    Saurabh Singh,

    The perception of customer on SD drop is inability to setup call.

    while for TCH drop, the perception will be inability to finish up his call (call drop)

    SD is at callsetup phase while TCH is applicable to already setup call.

    Other indicator that may affect customer call setup perception are;

    sd fail rate, sd congestion rate, sd drop & TCH fail rate.

    #52120
    Saurabh singh
    Guest

    Gud answer buddys.

    #52121
    laj
    Guest

    am using nokia semens BSC HC72&120, i want to know the limits (threshold value ) of the MPCC and TDPC.

    #52122
    anand
    Guest

    what was the diff b/w tch conjction and tch blocking

Viewing 9 posts - 91 through 99 (of 99 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.