Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

network design

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #51860
    Imran Ahsan
    Guest

    hello 2 all..
    i have assignment 2 submit on network design plan.
    1) consider network owned by organization outline design and problems in this network.

    2) Redesign the network by utilizing state of the art technologies and overcome the problems of existing network.
    the proposed solution should include the following:
    a)design objectives/goals.
    b)constraints/risks/assumptions
    c)functions requirement
    d)performance requirements
    e)site plan
    f)technical drawing
    g)identifying nodes and their geographical location,topology,media,capacity,technologies,hardware/software.
    h)migration plan
    i)project management
    j)budjet

    #51861
    pix
    Guest

    hello imran,

    interesting assignment 🙂 good luck with it !

    #51862
    MADA
    Guest

    Hi Pix,
    Can I use in the same cell 2 TRX the difference between them only 1 TRX as CH (50) & CH(52)in the Same cell

    Thanks in advance

    #51863
    MADA
    Guest

    Dears
    please no one can help me

    your cooperation high appreciated

    #51864
    pix
    Guest

    Mada,

    Hello ! I answered yesterday, but it looks like the message didn’t get through.
    It is possible to do as you say : Cell 1, with TRX1 = 50, TRX2 = 52.
    The only exception is if your vendor specifies otherwise, or if you use a really really old hardware.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.