[Tufail]

Hi All

I am facing a problem..

In a newly integrated co-cell HO is no taken place b/w its own sector.

ericsson system.

CS = yes
Frequency are define in Active as well as Inactive BCCH measurments

Nbrs r defined..

other HO to other cell take place..

kindly suggest

regards

Tufail

[Pix]

During drivetest, is the co-site neighbour being reported ?
What about indicator : do you see ho request between the two cells ?

If the neighbour is reported, then the BSC shall be able to trigger a handover.
If the HO command is sent to the MS, it means there is a ho request + ho allocated –> you should then see a HO failure (1 attempt w/o success = one ho failure in drivetest)

Altogether, you need to make lot more investigations, in order to isolate the root cause.

[Author]

Posts