Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Pico BTS_RBS 2409

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #51803
    ngocle
    Guest

    Hi all!
    We are preparing for instal RBS2409-Ericsson in our network. Can anyone tell me about: config, power, coverage, transmission and intergrate, o&m.
    Thanks and best regards!

    #51804
    kvf
    Guest

    We’re trying to integrate 2409 too.
    output power:23dBm
    1TRX only.(2TRX – 2nd RBS by Y-link,master-slave)
    GPRS support (CS-1 to CS-4)
    EGPRS(MCS-1 to MCS-9)
    EDGE,Dynamic power regulation,DTX,A5/1,A5/2 or A5/3
    Ethernet IP transmission interface
    IP security – IPSec, No hopping
    Good for indoor coverage.
    If you prepare to use Internet provider for connection RBS to BSC we’ve to config IPSec tunnel. BSC must use Abis over IP functionality of course. But there are other IP-based connection types.
    In our case RBS works OK without IPSec tunnel. But we can’t integrate RBS using IPSec. RBS2409 – cisco firewall = problem. But we trying to solve this issue now.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.