Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EDGE and Alcatel BSC

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #51777
    Tahar
    Guest

    Hi Experts,

    Could you please tell me to what extend the introduction of EDGE and the MCS9 usage impact the Alcatel BSC capacity.

    In other words, is an EDGE capable TRX requires more resources.

    Thanks in advance
    Tahar

    #51778
    Host
    Guest

    Hi tahar,
    Normally activating EDGE and MSC9 will need more ressources on Abis (Extra Abis TS)., consequently there is an impact on Alcatel BSC capacity (as extra TRX on BIUA and it depends on the Alcatel BSC generation).
    So what type of BSC do u use in ur network?

    #51779
    Tahar
    Guest

    Thanks Host for your answer.
    We have the following BSS nodes:

    BSC A9120
    BSC A9130
    BTS 9100
    B9 release

    #51780
    Hungtran
    Guest

    Could you tell me BTS,BSC Nokia:
    How to stablization? easy operation or hard, optimization?
    our network are going to use Nokia equipments.
    Thanks alot

    #51781
    Host
    Guest

    Hi tahar,
    For the A9130 BSC (BSC MX) there is no ressource consumption by activating EDGE MSC9 (only Abis ressources), but in A9120 each EDGE TRX will occupy a ressource on the TCUC (like a FR TRX).
    For more details refer to the customer DOC provided by Alcatel.
    BR

    #51782
    David
    Guest

    To A9130 Alcatel BSC folks,

    I am looking for basic physical interface information on the Abis and A links of this Alcatel BSC A9130 model. That is, is the interface optical STM1/OC3 on the Abis and A?

    Any help is greatly appreciated.

    Regards,
    David

    #51783
    Narchai
    Guest

    Both BSC9120and9130 need more resource for Abis extra TS for EDGE more extra TS BSC capacity will decrease. It depend on capacity plan(MCS9(~59.2kbps) need 1 abis TS(64Kpbs) for data tranfer)

    For MX_BSC (9130) can support STM1 interface (will introduce soon)

    #51784
    David
    Guest

    Narchai,

    Thank you for your response. You noted that STM1 is supported for both Abis and A interfaces *soon*?, then what kind of hardware interfaces are currently supported?

    Can your please comment on this?

    Thanks,
    David

    #51785
    Narchai
    Guest

    it optional of TP-GSM Board call”STM-1/VC12″ current B9 software release not available.

    BRs

    #51786
    KAMOLI
    Guest

    What is the function of BIUA AND TCUC in a BSC ?

    #51787
    armand nguetsa
    Guest

    hi,
    can i have documention on BSC MX alcatel in french please

    #51788
    muntasir
    Guest

    hi , can i have mx bsc alcatel in english plz

    #51789
    LAZIO
    Guest

    i have alcatel bsc mx doc in english. but I want exchange it vs this doc in french.

Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.