Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

config 3.3.3 RBS 2116

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #51614
    andreas
    Guest

    i want to how mani DRU i can use to config 3.3.3

    #51615
    marius
    Guest

    please if you know how to do it, let me know…I thing it’s impossimle to have this configuration. With 5 DRU you can have 3.3.4

    #51616
    Euge
    Guest

    Hi,

    with config 3.3.3 u need 6 DRUs.ie 2 DRUs per sector
    2 DRUs have 4TRXs out of which u use only three.

    #51617
    Marius
    Guest

    TKS, I heard about the followings: with only 5 DRUs installed you can have (software config.) 3 3 3 and only for the last cell will be one TRX unused.
    I think it’s posible.
    Regards.

    #51618
    Jose Teixeira
    Guest

    Yes you can do 3+3+3, using unconb/hybrid comb in the omt for the 2 first sectors you can do 3+3+4. so you block the last TRX to have 3+3+3. See in alex how to connect the Rxin1/2 Rxout1/2

    #51619
    mcdady
    Guest

    is the input power for 2116 AC or DC?

    #51620
    Daniel
    Guest

    You have need for RBS2116 nodes
    Config
    BFM 901 182 1
    BGM 119 12/1 1
    BKC 901 06/055 1
    BMG 907 013/4 1
    BMG 907 026/1 1
    BMK 905 53 1
    BML 901 124/1 3
    BMR 910 403/2 1
    BOE 901 03/1 1
    KET 109 31/1 1
    KRC 161 118/1 3
    KRY 901 107/1 1

    #51621
    Awii
    Guest

    Can anyone tell me how can I improve SDCCH Call Success Rate

    #51622
    ANDREAS
    Guest

    I NEED SOME IDEA!

    I HAVE TWO RBS CONNECTED TO BBS 8500, but every time i got somme BFU faulty
    i got this problem on 3 sites
    two BFU connected to the battery
    i think one bfu sending bad charge current

    any info please!

    #51623
    Jeff O’Kane
    Guest

    Hello, are you still in need of support for this RBS 2116?

    #51624
    ANDREAS
    Guest

    YES ANY IDEA AND INFO ABOUT 2116V2 CONNEXION TO BBS 8500

    #51625
    Eric
    Guest

    Hello Jeff O’Kane / Andreas,

    In Managed Object data, how we can distinguish cabinet type if it’s 2216 or 2206 (indoor / outdoor).

    We can distinguish between different cabinets, like 2×16 and 2×06 or any other, but how to see the difference in data and identify which one is indoor or outdoor?

    Thanks in advance.

    Eric

Viewing 12 posts - 1 through 12 (of 12 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.