Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTSM disabled

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #51536

    Dear All,
    Please, could anybody help us regarding issue in BTSM disable. In our network, Siemens,what actually happening is that, the site goes down. In this senario the LPDLM signalling wont get down, only the site goes down and BTSM is disable.What could be the probable reason for this problem.


    Check if the saluname in the BSc data base and in the site side are aligned, otherwise make an NE alignement , follow the procedure of the BTSE align..if it is ok check the link if it is stable, if no alarms check it with the bearer tester..good luck



    As well check the TEI

    Apart from this from the RC you can load the BTS SW again but in forced mode maybe there is a problem in the existing SW!

    If its presisits then make a new commissioning for the site..

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.