Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ericsson rbs commissioning

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #51445
    Gesang Basusena
    Guest

    dear all,

    do anyone know the difference between combined and uncombined in 2G commissioning rbs?

    i think its related to TRX and CDU

    any advise?

    thanks

    #51446
    andreas
    Guest

    combined that means the Trx / DRU can be interconnect between them and uncomb you can not

    #51447
    carem
    Guest

    combined – each TRU contains 2 TRX so in combined mode the 2 TRX connect to the CDU on 1 cable, this is used for configuration above 2,2,2 but u will have loss using the hybrid combiner so less coverage but greater capacity

    uncombined – there are 2 separate cables connecting the TRU (2 TRX) to the CDU so max configuration will be 2,2,2 but no loss so greater coverage but less capacity

    #51448
    emre
    Guest

    only 3db
    nothink:D

    #51449
    carem
    Guest

    every 3 dbm lost is half the ouput power . quite a bit i would think

    #51450
    Rahees Ahmed
    Guest

    yaa it dpnds TRX qty and adding to h/w confing…

    #51451
    akram
    Guest

    YES I KNOW

    #51452
    akram
    Guest

    THE DIFFRENT BET COMBIN & UNCOMBIN
    IS IN THE NUMBER OF DTRUS YOU NEED
    IF YOU NEED UP TO 2-2-2 CONFIG
    HENC NO NEED FOR HYBRID CONFIG

    #51453
    raj kumar
    Guest

    hell sir
    i want to know the step by step process of commissioning of ericsson’s edru or detatil

    #51454
    Azaz Khan
    Guest

    Hello all,

    can anybuddy tell me the step by step procedure of the commissioning of the ericsson 3000 series bts or node-b.

Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.