Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Flexi Bts problem

  • This topic has 1 reply, 1 voice, and was last updated 16 years ago by Bilal.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #51293
    veeru
    Guest

    I am working for nokia euipement , iam facing a problem in Ul path loss, is very low,(-96, -88 dbm and my DL -UL ( path balance is 20 .one thing i obseved that MS power is less(UL path loss=MS power-Ul signal strengh(12-(-74)=86 dbm.

    relative to this i have high interfernce band 4.7, please could u help me out? KPi are degarding

    #51294
    Bilal
    Guest

    MS power is less due to MS power control. If you are having greater path loss on DL then you must check you hardware i.e. TRU, combiner, feeder etc

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.