Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Blank call

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #51133
    Shaheed
    Guest

    while call gets connected, cant hear from both end.

    #51134
    Abdel
    Guest

    Hey shaheed,

    Can you hear the tone ring? if no then please check the Circuit Identification Code(CIC) Or the PCM number of the E1 at both the MSC and BSC. I am suspecting that either the CIC you are talking about have different at the MSC and BSC or the PCM of the E1 is different.

    #51135
    amir
    Guest

    check e1s connectivty (cross connectivity pro)

    check connector setting at the back side of MSC card

    or replace the card

    cic mismatch

    #51136
    Abdel
    Guest

    Exactly, CIC mismatch I was missing that word.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.