Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

two bts or several for the same E1

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #51085
    cosmonito
    Guest

    hi all,
    i want to know how to transmit several BTS using the same E1 ?
    (how about ODP)
    thanks

    #51086
    Ramos_PL
    Guest

    depends how many TRX you have… if 13(14) you can share the E1 making caskade connection. I know it from Ericsson 2206

    #51087
    Robbo
    Guest

    We have split an E1 with two DDS Fastway services in South Australia!

    #51088
    Abdel
    Guest

    Due to the limited transmission backbone bandwidth in some areas in our network. We have a 3 BTS sharing one E1 connected in diasy chain each with a capacity of S111.

    #51089
    Ibrahim
    Guest

    Hi Cosmonito,
    Actually, it depends on number of sites and TRX’s. Each site requires an OML & each TRX requires a RSL. So the combination of four LAPD signaling, say OML & RSL, occupies a time slot in an E1. From that you can know how many sites an E1 can support.

    Regards

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.