Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Dual band and Collacated Cells

Viewing 4 posts - 16 through 19 (of 19 total)
  • Author
    Posts
  • #51081
    pix
    Guest

    UL to OL ? what does it mean ?

    HO from outer zone to inner zone can fail because :

    – your settings are wrong (what are your settings ?)
    – the inner zone is “congested” (ho failure due to congestion)
    – cross sector : the inner zone is actually located in another sector 🙂
    – hardware problems : the Rx or Tx path in the BTS is faulty on the inner zone TRX.

    Regards,
    pix

    #51082
    Bilal
    Guest

    UL:underlaid(outer zone) and OL:overlaid(inner zone). We are using 900 in UL and 1800 in OL. Major cause of UL to OL failure is the coverage gap between two. The handover boundary can be fine tuned to resolve this problem.

    #51083
    Alex_R
    Guest

    thanks Bilal
    and thanks Pix 🙂

    #51084
    tllwellcell
    Guest

    if you are unsure the swith, you may use a software to have a test of it to make sure what the problem is. i recommend a software(CELLTEST) which is easy to use and has good performence.
    we have software base on PC & PDA both. so you can use PDA to test the hotspot place like train station and sport ground, and PC version for drive test or other usage.

Viewing 4 posts - 16 through 19 (of 19 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.