Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GOS and BHCA

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #34167
    Alex Phoon
    Guest

    Hi all,

    If I have an eqiupment, which can support up to 40000 BHCA. How many E1 does this equipment can support based on the below information:_
    1) the GoS was decided at 1% blocking.
    2) Average call holding time = 90 second

    #34168
    José Quintero
    Guest

    Hi Alex,

    The answer is: 34,2 Aprox to 35 E1

    #34169
    Alex
    Guest

    Hi Jose,

    Thanks a lot for your reply.
    Btw, I would like to know this more .
    Erlang = BHCA x Call holding Time /3600
    = 1000
    Based on GoS 1%, how do we get 34.2 E1 supported by 1000 erlang traffic. I understand that it’s contain with complex formula calcution, but if would be helpful if you could let me know how we would get it.
    By using Erlang Calculator or Using Erlang look-up table ??

    Thanks in advance

    #34170
    Jose Quintero
    Guest

    Hi, Alex,To use the table is a very useful way, but normally the table does not have the all values. In that case you have three Options. to use the Online CAlculator, use the table or A Excel Macro to do that

    Regards

    #34171
    Walter
    Guest

    I have as input MOUs ( minutes of use per month ) , considering a GOS of 1 percent, how many E1s are necessary ?

    Please explain details how did yu calculate it?

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.