Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2+2+4

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #50738
    Dux
    Guest

    What is the best solution of BCCH/SDCCH/TCH/PDTCH for configuration 2+2+4?

    Third sector:

    TRX 9 0TS-BCCH, 1TS-SDCCH
    TRX 10 0TS-SDCCH
    TRX 11 All TS for TCH
    TRX 12 All TS for PDTCH

    Any other solutions?

    #50739
    Pix
    Guest

    For the sector 3, why do you want to allocate 8 PDCH statically ? It might reduce your TCH capacity too much during the busy hour ?

    The configuration of each timeslot is not very important, you can put the TCH or SDCCH anywhere you want.
    For 4 TRX, it is recommended to have at least 2 SDCCH’s.
    So 1 BCCH + 2 SDCCH + xx TCH
    and thanks to parameters, you can decide to allocate up to 10 PDCH dynamically (MAX PDCH = 10) and 1 PDCH statically (MIN PDCH = 1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.