Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

IMSI Change Over

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #50345
    Abel
    Guest

    Hi
    I have this error message:
    ”NOT ACCEPTED
    FAULT CODE 10
    THERE IS AN IMSI PREFIX OF THE IMSI GIVEN ”
    when i put this command: HGICI:MSISDN=msisdn,NIMSI=nimsi;

    My network running on Ericsson.

    Please someone can help me.
    Kings Regards

    #50346
    Rachel
    Guest

    what do you want to implement precisely?

    For imsi implementation use:

    MGISI:IMSIS=imsi,M=5-mgt,NA=na,ANRES=OBA-oba&BO-bo&MAPVER-mapver&CBA-cba&CBAZ-cbaz;

    For imsi change use:
    MGISC:IMSIS=imsi,ANRES=….;

    #50347
    Abel
    Guest

    hi Rachel
    I want precisely make IMSI change Over in HLR for sim cards not for
    Mobile Telephony, IMSI Number Series Analysis Specification, Initiate.
    thanks you for Answers
    regards

    #50348
    Parry Joshi
    Guest

    When you are putting this command and you are getting fault then the new imsi you are giving is already used some where. first of all check that new imsi is loaded in auc or not. if it is loaded then it will be a free imsi means no msisdn has attached with this imsi. you can also delete the reference data of old imsi from HGIRI command. Just go with alex for below commands – HGIRI, HGICI, HGICE, HGICP, HGICC. Hope I satisfy your query

    #50349
    Srikanta
    Guest

    What is mean by IMSI change.
    and How i change my IMSI number of my PHONE

    #50350
    JOHN
    Guest

    How to put IMSI in AUC

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.