Generic selectors
Exact matches only
Search in title
Search in content

Encryption effect on data/voice quality

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #50078 Reply
    riverstreamer
    Guest

    Dear ALL

    What I bring is an assumption on an idea which seems right, but I don’t have no document to rely on it. So please read my notes and approve or rject it with your reasons and guide me. If you have document please send to my mail or give link in here. my mail is:
    riverstrear@gmail.com

    As you know we have two subject on every data or voice channel. 1. Encoding 2. Encryption
    Surely Encoding and it’s method is for increasing and using bandwidth on each channel.

    BUT for Encrption, surely each encryption process increase datum volume in each pack and so because of limitation total data size, the rate of sampling decrease to some entent. In addition on bit error rate, the number of faults increases after encrytion, because for each fault, amount of net data/voice real datum which can be decryted will be decreased. SO:
    I think if encrytion on a channels 1.the rate od datum in Kb/s will decrease 2. C/I will be get lower value in test 3. the voice quality will be damaged to some extent.

    Please give me your idea and guide me on this theory of you have any idea by yourself or on document.

    PS: for enabling or disabling encrytion on channels, you can assume TETRA, GSM or other neyworks.

    Thanks you and waiting for your replies.

    riverstreamer [AT] gmail [DOT] com

    #50079 Reply
    pix
    Guest

    i could check tomorrow, but i’m pretty sure that the encryption comes beore the encoding.
    So the encoded frames contains encrypted data. After decoding, either the frame is valid or not. If it is, then it means most important bits are fully recovered, therefore the data can be decrypted successfully.

    #50080 Reply
    riverstreamer
    Guest

    Dear Pix
    Thanks for your reply. your answer showed me two important subject. I’m waiting for your more checks and guides.
    excuse me, I wrote my email wrong. My Email is:
    riverstreamer@gmail.com
    If it was possible please contact me on Email too. (For other subjects, you are great)

    Dear friends
    Please bring your comments too.

    #50081 Reply
    Yousef
    Guest

    1. Althought data encrypts before encoding as PIX said, but there is no different in amount of datum, because in anyway, encryption increases the amount of a net datum to bigger size and this catch more capcity of bandwidth so may effect on quality in distance.

    2. it is right that corrupted datum will be retransmitted and real datum will be recovered but this subject get more capacity in use too.

    Maybe other friends can help more.

    #50082 Reply
    pix
    Guest

    Just one thing : corrupted data (datum, really ???) get retransmitted only if we’re in EGPRS. For voice call, there is absolutely no retransmission.

    #50083 Reply
    saman
    Guest

    Accroding to docs from GSM fundamentals and practical behavior which I have read, there are two types of “ERROR Correction Coding”:
    Backward error correction & Forward Error Correction
    -Backward Error Correction: if check bits are correct, it’s assumed all the information are correct, but if check bits have problem, then AUTOMATIC REPEAT REQUEST enabled -> It’s more used for dat and not suitable ofr speech
    -Forward ERRO Correction:
    it’s in two types and in GSM used a combination of them: *Block codes *convolutional codes
    ….brb

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Reply #50080 in Encryption effect on data/voice quality
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">