Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Remote Transcoder failure

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49850
    NK
    Guest

    Hi! Everyone,

    Thank you in advance. Our vendor is Siemens. In certain, sites we are getting very high TCH drops. Reasons we find is “Remote Transcoder Failure”. Anyone has idea how to resolve the problem.

    NK

    #49851
    pix
    Guest

    remote transcoder system drops are detecte due to loos of synchro between BTS and TC. Therfore, anything in between can be the problem :
    SUM fail – ABIS fail – BSC/ABIS board fail (TCU) – BSC/ATER board fail (DTC) – ATER fail – TC board fail

    I recommend you check which sites are having RTC drops, and ind what is the common equipment between them : BSC ? TC ? Abis ?

    Most of the time, it has to do with Abis failures (if only all cells connected to this Abis are impacted), or BSC board failures.

    Pix

    #49852
    NK
    Guest

    Thank you, pIx . There is problem in Abis.

    Regards,
    Nirendra KC

    #49853
    Abed
    Guest

    Hi NK.
    Set TTRAU parameter in BTS to 4000.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.