Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to calculate no of subscriber….

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #49806
    Sachin Aneja
    Guest

    my CDMA BSC capacity is 15k . How i can calculate no of subscribers it can handle…

    #49807
    Abdel
    Guest

    It depends on your average traffic per subscriber. Different countries and different cultures. In the UAE the average traffic per subscriber is 75miliErlang one of the highest in the world. While the nominal is 25miliErlang. In our country it is 33miliErlang. If your average traffic per subscriber is high your BSC can handle less subscribers. but I don’t remember the formulae. someone else may help you.

    Abdel

    #49808
    pix
    Guest

    capacity of 15k… 15k of what ? erlangs ?

    #49809
    sachin Aneja
    Guest

    in our system , we use 25 erlang per carrier/per sector.& capacity of BSC is 15K. then pls tell me how to calculate no. of subscribes it can handle.

    #49810
    NarChai
    Guest

    In GSM
    If average traffic per sub. is 25 miliErlang
    0.025 = traffic(Erl)/Number of subscribers

    BSC capacity = 15,000 Erl
    thus
    subscriber = 15k/0.025 = 600K

    #49811
    Sachin
    Guest

    is there any difference for CDMA system.

    #49812
    pix
    Guest

    it would approximatively be the same. it only depends on which law you use to calculate capacity : erlang B law, erlang C law, … ?

    #49813
    Prabhu
    Guest

    impact of HGREI command in HLR??
    Anyone knows?

    #49814
    deeepak
    Guest

    If BSC having TRX 2048 than how can we calculate Traffic in erlag and no. of subs

    #49815
    erny
    Guest

    How do you calculat erlang per sector.

    #49816
    Maaz
    Guest

    if for BTS configuration 1/1/1 what’s the number of subscriber it support for 25mE for single carrier

    #49817
    Ayat
    Guest

    Hello

    average traffic per subscriber is 75miliErlang

    So how we can calculate MOU per subscriber per month ?
    Some refrence talk about it and they said that in some operator it reach 800 , mou =800 , in china 2015 there are some reports talk about mou =430
    How i can calculate
    In our network 21 to 30 merl

    #49818
    mustafa ibarahim
    Guest

    i need to convert number of users to Erlang ,to know how many sites i need to cover these users

    #49819
    Wallis Dudhnath
    Guest

    Answer to Prabhu.

    Use the MML command during a low traffic period.

    It can take APZ processing power.

    Careful with HLR-R (Mated Pairs) implementation.

    HGREI:VLRADDS=vlradds;
    HGREI: VLRADDS=vldaddr, REDHLR;

    VBR/ Wallis Dudhnath

Viewing 14 posts - 1 through 14 (of 14 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.